Setting the tone / tone modify settings

Enables you to set the musical instrument tone to match the ambiance of a song.

On the PX-S6000/PX-S7000, multiple items can be set at once.

1.Tap the Tone / Tone Modify button

PX-S7000_tone modify

2.Specify the settings below.

Layer ON/OFF button

Enables/Disables the function for playing with two different tones overlaid. Selecting ON enables layer tones (“Upper2”) and the instrument produces both “Upper1” and “Upper2”.

Split ON/OFF button

Enables/Disables the function for playing with different tones in high and low ranges. Selecting ON enables split tones (“Lower”) and the instrument produces “Upper1” and “Lower” or “Upper1”, “Upper2” and “Lower”.

Configuring split points and displaying parts separately

They are displayed in different colors according to the settings in Layer and Split.

Tap the keyboard or the color-coded display area to display a list of tone names.

Turn on Split to show the dividing line between the treble and bass ranges (split point). You can also set and change the split point by sliding it left or right on the keyboard.

Upper1 tone button

The main tone is displayed. Tap to display the tone list screen and change the tone settings.

Upper2 tone button

Displayed when Layer is ON. The secondary layer tone is displayed. Tap to display the tone list screen and change the tone settings.

Lower tone button

Displays the bass range when Split is ON. Tap to display the tone list screen and change the tone settings.

Modify button (PX-S6000/PX-S7000)

Tap to set the following items.

Upper1

  • Cutoff Freq., Resonance, Attack Time, Release Time, Vibrato Rate, Vibrato Depth, Delay Vibrato Time, Portamento Time, Octave Shift, Part Fine Tuning, Pedal Unit, Expression/Assignable Pedal, Pitch Bend Wheel, Control Button : Modulation

Upper2

  • Octave Shift, Part Fine Tuning, Pedal Unit, Expression/Assignable Pedal, Pitch Bend Wheel, Control Button : Modulation

Lower

  • Octave Shift, Part Fine Tuning, Pedal Unit, Expression/Assignable Pedal, Pitch Bend Wheel, Control Button : Modulation

Tone settings

1.Displays a screen showing a list of tones for the part to be reconfigured.

PX-S7000_Tone setting

2.Setting the tone

Tap X in the upper right corner of the screen to return to the tone/tone modify screen.

Acoustic settings

1.Tap the Modify button

PX-S7000_acoustic settings

2.Setting each item

Upper1 only

  • Cutoff Freq.

Changes the sound by filtering out frequencies above a certain point (the cutoff frequency). The higher the setting, the brighter the sound becomes. The lower the setting, the darker/duller the sound quality becomes.

  • Resonance

Adjusts the gain applied to frequencies around the cutoff frequency. The higher the value, the more distinct the sound around the cutoff frequency.

  • Attack Time

The time from when the note starts until it reaches its maximum volume (rise time) after a key is pressed. The larger the value, the slower the rise.

  • Release Time

The time it takes for a note to fade out after the key has been released. The higher the value, the longer the fade out time.

  • Vibrato Rate

The speed of the vibrato.

  • Vibrato Depth

The depth of the vibrato pitch swing.

  • Delay Vibrato Time

The delay between the start of the sound and the beginning of the vibrato effect.

  • Portamento Time

The portamento glide time.

Upper1, Upper2, Lower Common

  • Octave Shift

Changes the keyboard range in increments of one octave. You can shift the range two octaves up or down from the original range.

  • Part Fine Tuning

This allows you to vary the tuning very slightly up or down by a semitone or less.

  • Expression/Assignable Pedal

Switches the Expression/Assignable pedal ON/OFF. Connecting the supplied pedal (SP-3/SP-20) or a commercially available expression pedal to the instrument and switching it ON allows you to adjust parameters such as volume and tempo.

For more information on the expression pedal connection method and functions, refer to the User’s Guide for your musical instrument.

  • Pedal Unit

Switches the pedal unit ON/OFF. Connecting the pedal unit (three-pedal, optional) to your musical instrument and switching it ON provides pedal expression that more closely matches the grand piano experience.

  • Control Button : Modulation

Switches the control button ON/OFF. When switched ON, the sound is modulated.

  • Pitch Bend Wheel

Switches the pitch bend wheel ON/OFF. Enabling the pitch bend wheel allows you to smoothly raise and lower the pitch of the tone that is currently sounding.