You can change the MIDI settings in the musical instrument.

1.Tap the “MIDI” button.

2.Specify the settings below.

①

Local Control

When this is set to “OFF”, performance information on the musical instrument (MIDI data) is output, but no sound is produced by the musical instrument itself. This setting is only used for sending MIDI data to an external device.

②

MIDI OUT Channel (Main Part)

Change the channel of the MIDI message output of the main part performance.

Tap OFF, “+” or “-” to set the channel between 1 and 16.
Tap the “reset” button to return the value to the default setting.

③

MIDI OUT Channel (Layer Part)

Change the channel of the MIDI message output of the layer part performance.

Tap OFF, “+” or “-” to set the channel between 1 and 16.
Tap the “reset” button to return the value to the default setting.