Enables you to set the musical instrument tone to match the ambiance of a song.

1.Tap the “Tone” button.

2.Specify the settings below.

①

Layer ON/OFF buttons

Turns ON/OFF the function that allows you to layer and play two different tones. When ON, the layered tone (“Upper2”) is enabled and the sound is produced on “Upper1” and “Upper2”.

②

Split ON/OFF button

Turns ON/OFF the function for playing different tones in the treble and bass registers. When ON, Split Tone (“Lower”) is enabled and sound is produced with “Upper1” and “Lower”, or “Upper1”, “Upper2” and “Lower”.

③

Configuring split points and displaying parts separately

They are displayed in different colors according to the settings in Layer and Split.

Tap the keyboard or the color-coded display area to display a list of tone names.

When Split is on, the border between the high and low frequencies (split point) displays. Split point can also be set and changed by sliding the keyboard more to the left or right.

④

Upper1 tone button

The main tone is displayed. Tap to display a list of part names, tone numbers and tone names, allowing you to change the tone settings.

⑤

Upper2 tone button

Displays when Layer is turned on. The secondary layer tone is displayed. Tap to display a list of part names, tone numbers and tone names, allowing you to change the tone settings.

⑥

Lower tone button

When Split is turned on, the tone in the bass register displays. Tap to display a list of part names, tone numbers and tone names, allowing you to change the tone settings.

Part settings

1.Displays a screen showing a list of tones for the part to be reconfigured.

①

Settings button

2.Tap the Settings button.

3.Specify the various settings.

Upper1, Upper2, Lower Common

①

Volume

Sets the volume. Tapping “+” increases the volume.

Upper1, Upper2 Common

②

Octave Shift

Changes the keyboard range in increments of one octave. You can shift the range two octaves up or down from the original range.

Upper2, Lower Common

③

Detune

Fine-tune the relative pitch of the part.

④

Damper Pedal

Turns the damper pedal ON/OFF.