Enables you to set the musical instrument tone to match the ambiance of a song.

1.Tap

2.Specify the settings below.

①

Layer ON/OFF button

Enables/Disables the function for playing with two different tones overlaid. Selecting ON enables layer tones (“Upper2”) and the instrument produces both “Upper1” and “Upper2”.

②

Split ON/OFF button

Enables/Disables the function for playing with different tones in high and low ranges. Selecting ON enables split tones (“Lower”) and the instrument produces “Upper1” and “Lower” or “Upper1”, “Upper2” and “Lower”.

③

Configuring split points and displaying parts separately

This feature shows different colors according to the Layer and Split settings.

Tapping the keyboard or a colored display area shows a list of tones.

When splitting is enabled, the boundary between the high and low ranges (split point) is shown. The split point can also be set or changed by sliding it left or right on the keyboard .

④

Upper1 tone button

Shows the main tone. Tapping displays a list of part names, category names and tone names, allowing you to change the tone settings.

⑤

Upper2 tone button

Displayed when layers are enabled. Shows the main tone and the layer tone. Tapping displays a list of part names, category names and tone names, allowing you to change the tone settings.

⑥

Lower tone button

Displayed when splitting is enabled. Shows the low range tone. Tapping displays a list of part names, category names and tone names, allowing you to change the tone settings.

Part settings

1.Displays a screen showing a list of tones for the part to be reconfigured.

2.Tap

3.Specify the various settings.

The settings are all the same for Upper1, Upper2 and Lower.

①

Volume

Sets the volume. Tapping “+” increases the volume.

②

Octave Shift

Changes the keyboard range in increments of one octave. You can shift the range two octaves up or down from the original range.

③

Detune/Part Fine Tuning

This allows you to vary the tuning very slightly up or down by a semitone or less.

④

Pedal Unit

Switches the pedal unit ON/OFF. Connecting the pedal unit (three-pedal, optional) to your musical instrument and switching it ON provides pedal expression that more closely matches the grand piano experience.

⑤

Damper Pedal

Switches the damper pedal ON/OFF. Connecting the pedal provided (SP-3) or the optional pedal (SP-20) to the musical instrument provides performance effects such as sustained reverberation even after you take your foot off the pedal.

For more information on the damper pedal connection method and functions, refer to the User’s Guide for your musical instrument.

⑥

Expression/Assignable Pedal

Switches the Expression/Assignable pedal ON/OFF. Connecting the pedal provided (SP-3), the optional pedal (SP-20) or a third-party expression pedal to the musical instrument and switching it ON allows you to adjust settings such as the volume and tempo.

For more information on the expression pedal connection method and functions, refer to the User’s Guide for your musical instrument.

⑦

Pitch Bend Wheel

Switches the pitch bend wheel ON/OFF. Enabling the pitch bend wheel allows you to smoothly raise and lower the pitch of the tone that is currently sounding.